Welcome to Sino-Hero(Shenzhen)Bio-Medical Electronics Co.,Ltd
Catalog Download
Product Introduction

Multi-Parameter Patient Monitor


Unique Vertical Design delivers outstanding readability
15" LED super Display with Full Touch wide screen
High-end parameter modules of M series seamlessly compatible with iS series
With flexibility and freedom to pre-configure and major monitoring parameters
High-end Parameters: SunTech NIBP, CO, EtCO2, AG
Exceptional connectivity by high-speed cable or wireless Networking

Technical Specification

Size and Weight

- Product size: 23.5x36.6x17.2cm
- Packing size: 51x55x40cm
- Net weight: ≦6kg
- Gross weight: 10kg
-Standard module slot: 3

Power supply
-Power Voltage: AC 100-240V 50/60Hz
-Input Current: 1.7-0.8V
-Safety class: Category I

-15" Color TFT-LED
-Resolution: 768x1024 pixels

-Type: Rechargeable Lithium battery,11.1V/4.0AH
-Operating time under the normal use and full charge:
≧120minutes(2 batteries for 240 minutes)

Recorder (Option)
-Method: Thermal dot array
-Paper width: 50mm(1.97 in)
-Paper length: 15m
-Paper Speed: 12.5/25/50(mm/sec)
-Traces: Maximum 3 tracks
-Recording way: Real-time recording
Periodic recording
Alarm recording

-Level: Low, medium and high
-Indication: Auditory and visual
-Patient Physiological Alarm Light color: Yellow & Red
-Equipment Technical Alarm Light color: Blue
-Supports Pitch Tone and multi-level volume
-Supports custom arrhythmia tone

Input device
-Touch screen: Standard config
-Mouse input: Support
-Keyboard input: Support

System Output & Extensible Interfaces
-Ethernet Network: 1 Standard RJ45 socket
-Defibrillation Output: 1 BNC connector
-Nurse Call: 1 RJ11 connector
-Video Output: 1VGA port
-SD memory card: 4Gb (Option)
-Analog Output(ECG or IBP): Option

Trend & Reviewing
-Trend: Long trend:168h, minimum resolution is 1min
(Store when power goes off)
High resolution trend: 2h, minimum resolution is 5s
-NIBP measurement reviewing:1000 groups
-ARR event: 128 groups of ARR event and the associated waveform
-Alarm events: 128 groups of parameter alarm events and associated parameter waveform at the alarm moment
-Full Disclosure waveform: 24 hours for 3 waveforms(with 4Gb SD card)

-Operating temperature:0℃~+40℃
-Storage temperature:-20℃~+50℃
-Operating humisity:15% to 85% non condensing
-Storage humidity :10% to 93% non condensing
-Operating atmospheric pressure:860hPa to 1060hPa
-Storage atmospheric pressure:500hPa to 1060hPa

-IEC60601-1 Approved, CE marking according to MDD93/42/EEC

-Lead Mode: 3-leads ECG input
5-leads ECG Input
12-leads ECG input
-Lead ion: Ⅰ,Ⅱ,Ⅲ
Ⅰ,Ⅱ,Ⅲ, aVR,aVL,aVF,V1-V6(option)
-Gain: 2.5mm/mV(x0.25), 5mm/mV(x0.5), 10mm/mV(x1), 20mm/mV(x2), 40mm/mV(x4),Auto
-CMRR:Monitor mode       0.5~40Hz
Surgery mode       1~25Hz
Diagnostic mode   0.05~150Hz
-Frequency response(-3d B):
Monitor mode≧105dB
Surgery mode≦105dB
Diagnostic mode≧90dB
-Input impedance: ≧5.0Mohm
-ECG signal range: ±10.0mV
-Electrode offset potential: ±500mV
-Patient Leakage Current: <10uA
-Standardizing signal: 1 mV±5%
-Baseline recovery: <5s after Defibrillation. (Mon or Burg mode)
-Indication of electrode separation: Every electrode(exclusive of RL)
-Protection: Breakdown Voltage 4000VAC 50/60Hz; defibrillator proof
-Sweep speed: 12.5mm/s, 25mm/s, 50mm/s

-Range:Adult 10-300bpm
Pediatric & Neonate: 10~350bpm
-Refreshing time:≦50 bpm Per 2 pulses
50-120bpm per 4 pulses
≧120bpm per 6 pulses
-Resolution: 1bpm
-Accuracy: ±1% or ±1bpm,whichever is greater

ST segment
-Measurement range: -2.0mV~2.0mV
-Accuracy: -0.8m~V0.8mV: ±0.02mV or ±10% whichever is greater
Over ±0.8mV: unspecified
-Resolution: 0.01mV

-Method: Thoracic impedance
-Lead Selected from: Ⅰ(RA-LA) orII(RA-LL); Default: Ⅰ
-Gain: x0.25, x1, x2, x4
-Bandwidth:0.25Hz to 2.0Hz (-3dB)
-Sweep Speed: 6.25mm/s,12.5mm/s,25mm/s
-Measurement Range: 0~150 rpm
-Resolution: 1rpm
-Accuracy: ±2rpm or 2% whichever is greater
-Delay of Apnea Alarm: 10s,15s,25s,30s,35s,40s,45s,50s,55s,60s

-Way of measurement: Automatic oscillometry
-Range of measurement:
Adult:         SYS 30~270mmHg
DIA 10~220mmHg
MAP 20~235mmHg
Child:          SYS 30~235mmHg
DIA 10~220mmHg
MAP 20~225mmHg
Neonate:    SYS 30~135mmHg
DIA 10~100mmHg
MAP 20~125mmHg
-Cuff pressure range: 0~300mmHg
-Resolution: 1mmHg
-Pressure Accuracy: Static: ±2% or ±3mmHg,whichecer is greater
Clinical: ±SmmHg average error
Standard deviation: ≦8mmHg
-Unit: mmHg, kPa
-Measurement mode: Manual, Auto, STAT
-Intervals for AUTO measurement time:1,2,3,4,5,10,15,30,60, 90 minutes;2, 4, 8, 12 hours
-STAT mode cycle time: Keep 5 minutes, at 5 seconds interval.
-Overpressure Protection: Hardware and software double protections
-Pulse rate range: 40~240bpm

Standard SpO2 (Digital)
-Measurement Range: 0~100%
-Resolution: 1%
-Accuracy: At70~100%,±2%
At0-69%, unspecified

-Measurement Range: 25~255bpm
-Resolution: 1bpm
-Accuracy: ±1% or ±1 bpm,whichever is greater

Nellcor-SpO2 (Option)
-Measurement Range: 0~100%
-Resolution: 1%
At70~100%: ±2%(Low Perfusion)
At0~69%, unspecified

-Measurement Range: 20~300bpm
-Resolution: 1bpm
-Accuracy: 20bpm to 250bpm:±3bpm
251 bpm to 300bpm: unspecified

Masimo-SpO2 (Option)
-Measurement Range: 0% to 100%
-Resolution: 1%
-Accuracy: 70% to 100%:±2%(adult/pediatric,non-motion conditions)
70% to 100%:±3%(neonate,non-motion conditions)
70% to 100%:±3%(motion conditions)
0% to 69%, unspecified
-Average time: 2-4s,4-6s,8s,10s,12s,14s,16s

-Measurement Range: 25bpm to 240bpm
-Accuracy:±3bpm(non-motion conditions)
±5bpm(motion conditions)
-Resolution:1 bpm

-Max Channel: 8
-Measurement way: Thermal resistance way
-Measurement Range: 0.0℃~50.0℃ (32℉~122℉)
-Accuracy: ±0.1℃ or ±1℉(exclusive of probe)
-Resolution: 0.1 ℃ or 1℉
-Unit: Celsius(℃),Fahrenheit(℉)

-Max Channel: 8
-Measurement way: Directly invasive pressure measurement
-Sensitivity of transducer: 5uV/V/mmHg, ±2%
-Impedance of transducer: 300 to 3000Ω
-Measurement Range: -50~+350mmHg
-Resolution: 1mmHg
-Unit: mmHg, kpa, cmH2O
Static: ±1 mmHg or ±2%, whichever is grater(exclusive of transducer)
±4mmHg or ±4%, whichever is grater(inclusion of transducer)
Dynamic: ±4mmHg or 4%, whichever is grater
Transducer sites: Arterial Pressure                       (ART)
Pulmonary Artery Pressure    (PA)
LeftAtrium Pressure               (LAP)
Right Atrium Pressure            (RAP)
Central Venous Pressure       (CVP)
Intracranial Pressure              (ICP)
-Selection of measurement range:
ART: 0~+350mmHg
PA: -10~+120mmHg
CVP/RAP/LAP/ICP: -10~+40mmHg
P1/P2: -50~+350mmHg

EtCO2 (Sidestream)
-Measure method: Infrared spectrum
-Measure Range: 0.0~13.1%(0~99.6mmHg)
-Resolution: 1mmHg
-Unit: %, mmHg, kPa
-Accuracy: 0% to 4.9%, ±0.3%(±2.0mmHg)
5.0%to 13.1%, <±10% of reading
-Measurement range of awRR: 3~150rpm
-Calibration: Offset calibration: auto, manual, Gain calibration

EtCO2 (Mainstream)
-Measure method: Infrared spectrum
-Warm up time: Capnogram displayed in less than 15 seconds, At an ambient
Temperature of 25t,full specifications within 2 minutes.
-Measure Range: 0.0~19.7%(0~150mmHg)
-Resolution: 1mmHg
-Rise time(10l/min): ≦60ms
-Unit: %,mmHg,kpa
-CO2 Accuracy:0-40mmHg, ±2mmHg
41-70mmHg, ±5% of reading
71-100mmHg, ±8% of reading
101-150mmHg, ±10% of reading
(at 760 mmHg,ambient temperature of 25℃)
-awRR measurement range:0~150rpm
-awRR measurement Accuracy: ±1 rpm

EtCO2 (Microstream)
-Measure method: Infrared spectrum
-Warm up time: Capnogram displayed in less than 20 seconds, At an ambient Temperature of 25°C,full specifications within 2 minutes.
-Measure Range: 0.0-19.7%(0-150mmHg)
-Resolution: 1mmHg
-Unit: %, mmHg, kPa
-CO2 Accuracy: 0-40mmHg, ±2mmHg
41-70mmHg, ±5% of reading
71-100mmHg, ±8% of reading
101-150mmHg, ±10% of reading
(At 760 mmHg,ambient temperature of 25°C)
(When RR>80 rpm, all the range is ±12% or reading)
CO2 response time: <3S
-awRR measurement range: 2~150rpm
-awRR measurement Accuracy: ±1rpm
-Sample Flow Rate: 50ml/min ±10ml/min

Anesthetic Gas
-Measure method: Infrared spectrum
-Measure mode: Mainstream or Sidestream
-Fi and ET values: CO2 ,N2O ,O2 ,AG(HAL,ISO,ENF,SEV,DES)
-Calibration: Room air calibration performed automatically when changing airway adapter (<5 sec)
-Warm-up time: <10S, full accuracy within 1min
-Measurement and alarm range of AG
-Gas                  Range                Accuracy
CO2                0-10%                ±(0.3%ABS+4%REL)
N2O                0-100%              ±(2%ABS+8%REL)
O2                  10-100%             ±(2%ABS+2%REL)
HAL,150,ENF   0-5%                   ±(0.15%ABS+10%REL)
SEV                0-8%                   ±(0.15%ABS+10%REL)
DES                0-18%                 ±(0.15%ABS+10%REL)
-awRR measurement range: 0~150rpm
-awRR measurementAccuracy:±1rpm
-Rise time(flowing speed 10l/min)CO2≦90ms
-Total system response time: <1seconds

-Measurement Mode: Thermal dilution method
-Measurement Wave: Thermal dilution curve
-Measurement parameters: C.O.,TB, TI, C.I.
-Measurement Range: C.O.: 0.1 L/min~20 L/min
TB: 23.0~43.0℃
TI: -1.0~27.0℃
-Resolution: C.O.: 0.1 L/min
TB: 0.1℃
TI: 0.1
-Accuracy: C.O.: 2% SD
-TB Alarm range: 23.0~43.0℃ , high/low limit can be adjusted continuously

Option parameter & configuration of iS15:
Option Module: SideSteam EtCO2 Module, MicroStream EtCO2 Module, MainStream EtCO2 Module,
AG Module, C.O. Module, IBP Module, Temp Module, Nellcor SpO2 Module, Masimo SpO2 Module,
SunTech-NIBP Module
Navigating: USB Compatible Mouse and Keyboard
Printing: 3 Channel Thermal Recorder
Mounting: Rolling Stand, Wall Mount
Battery: 11.1 V/4.0AH Rechargeable Lithium Battery
Other options: External Display, Wireless Lan, Extensive Memory card, Analog Output (ECG or IBP)

Standard Configuration of iS15:
3/5 Lead ECG, HR, RESP, NIBP, SpO2, PR, 2-TEMP
Main unit: 15" TFT-LCD display, 3 Standard Module slot, Touch Screen,
1 RJ45 Ethernet Socket,1 Defibrillation Output,1 Nurse Call Socket, 1 VGA Port,
2 USB1.1 Port,1Lithium Rechargeable Battery

Copyright 2017 Sino-Hero(Shenzhen)Bio-Medical Electronics Co.,Ltd. ICP:06126166号-1

log in